Get RAPTOR

Baking

Baking the scene

Bake from the Render menu in RAPTOR's top bar.

Save the scene

File → Save in Unity

Bake

Choose Render → Bake lighting. Changed models are built first. The Render menu shows Baking with a percentage.

Keep the result

With Bakery, RAPTOR saves the scene at the end of the bake. Otherwise, save the scene to keep the lightmaps.

To cancel, press Cancel in Unity's Lighting window or Bakery's progress window. The ray-traced preview pauses during a bake.

After a bake, Unlit and Wireframe 3D views switch to Shaded. Moving or editing part of a baked model, or placing or moving one of its lights, makes its lightmap out of date until the next bake, and a Shaded view switches to Unlit. To turn this off, use Settings → General → Shading follows bake.

Lightmaps belong to the scene

A saved model does not carry its lightmaps. Bake again after loading a model into a scene.

Bake settings

Render → Bake settings opens these settings. The quality and the probes are saved for you only, the Custom settings for the project.

SettingEffect
QualitySets Draft, Final or Custom quality, by the names the project gave them. Custom is there while Show Custom is on. See Quality
ProbesBakery only. How props and moving parts are lit: Volumes or Off
Bake lightingStarts the bake

The note under the button shows what the bake covers and how the last bake ended.

Quality

Higher quality uses larger lightmaps and more samples, and takes longer to bake. These are the values a new project starts with. Baking presets changes them for the project.

OptionEffect
Draft32 texels per metre, maps up to 2048 px
FinalTwice the texel density, maps up to 4096 px, four times the samples
CustomUses the values you set

The scene's lighting settings are restored after the bake. A scene without Lighting Settings gets one named RAPTOR Lighting.

Custom adds these settings:

SettingEffect
Texel densityLightmap texels per metre, 2 to 1024
Light samplesSamples for direct light and shadows, 1 to 1024
GI samplesSamples for bounced light, 1 to 1024
BouncesHow many times light bounces, 0 to 5 with Bakery, 0 to 16 with Unity. With Unity it also changes the scene's setting
Volume densityLight volume probes per metre, 0.25 to 16. Bakery only
Sample dividerDivides the samples for a faster test bake, 1 to 8
DenoiseRemoves noise from the lightmaps

Lighting things that move

The baked light of a room reaches things that are not part of its lightmap, such as the player's character, Dynamic props, Moving parts and anything your game spawns, in Play mode and in a game build.

  • Unity bake: every model gets a child named RAPTOR Light Probes, a grid of light probes about one every 2 metres, baked with the lightmaps. A model that already holds a Light Probe Group of your own keeps only yours.
  • Bakery bake with Probes set to Volumes: each model's light volume lights them. This needs Bakery's URP shader package.
  • To keep an object and everything under it out of the light volumes, add RAPTOR → Skip Light Volume to it.

Baking presets

Settings → Baking sets the presets for the whole project, so everyone who opens it gets the same ones. A project that never opens this page bakes with the values above.

SettingEffect
Show CustomPuts Custom in the Render menu and opens its tab
Draft, Final, CustomOne tab per preset, named after it. Reset puts the tab's values back to the ones a new project starts with, and keeps the name
NameThe preset's name in the Render menu, the last bake's note and the Console. At most 12 letters. A name another preset already has shows In use and is not kept

With Bakery, Draft and Final hold Lightmap size (x1, x2 or x4), Light samples, GI samples, Sample divider, Denoise, Volume density and Fast GPU. Without Bakery they hold the Progressive lightmapper's values: Texel density, Max lightmap size, Direct samples, Indirect samples, Environment samples and Denoise.

With Bakery, Custom also lists Bakery options: Bakery's full list of render settings, in the groups of Bakery's own window. A changed setting has a reset button, and Reset all clears them all. These only apply to a Custom bake, and every value goes back after it.

While Bakery's GPU test is needed, the page starts with Bakery needs setup, with Set up Bakery and Bake without it.

Sky and sun

The sky lights a bake only through faces with the Skybox material applied, under Special in Materials. Set the scene's sky in the Sky panel, and bake again after changing it.

  • With no Skybox faces, the sky adds no light.
  • With Skybox faces, the scene's skybox lights the level where it is open to the sky.
  • For a sun, add a Directional Light set to Baked or Mixed.

When a bake does not start

The Render menu and the note in Bake settings show the reason:

MessageFix
No bakerSee Troubleshooting
Save sceneSave the scene
Baked GI offTurn on Baked Global Illumination in Unity's Lighting window
Bakery sceneSee Troubleshooting
Bakery needs NVIDIABake on a PC with an NVIDIA GPU, or choose Use Unity's lightmapper. See Unity or Bakery
Bakery needs setupChoose Set up Bakery or Bake without it. See Unity or Bakery
Exit Play modeLeave Play mode, then bake
Nothing to bakeAdd a part that does not move. Bakery does not bake moving parts

If a model fails to build, the bake stops and the Console names the model.

Bakery project settings

These settings are in Edit → Project Settings → RAPTOR → Bakery when Bakery is installed.

SettingEffect
BakeryShows OK, or Partial if RAPTOR cannot find everything it needs in your Bakery version
GPUShows NVIDIA or Not NVIDIA
SetupShows whether Bakery's GPU test has run on this GPU: Set up, Needs setup, Baking without setup or Not checked, with Set up Bakery and Bake without it
BakerShows Unity lightmapper while this PC bakes with Unity's lightmapper, with Use Bakery to take it back
Fast GPUOn, Auto or Off. On, Draft and Final use a tile sized for the GPU and the RTX mode that Bakery's GPU test recommends. Auto does that only on a GPU with hardware ray tracing. Off keeps Bakery's own settings
Lightmap group folderSets a folder of lightmap groups your project makes itself. New model names are checked against it. The folder must exist. RAPTOR's own groups are saved beside the scene
Settings guardStops a scene's Bakery settings from resetting
Auto skyAdds the RAPTOR Sky when a model first gets Skybox faces

Unity or Bakery

Bakery is a separate paid asset. RAPTOR works with or without it.

PartWithout BakeryWith Bakery
Lights placedUnity lights, set to BakedBakery lights
BakerUnity's Progressive lightmapperBakery
NeedsA saved scene, with Baked Global Illumination onAn NVIDIA GPU, and Bakery 1.98 or newer (1.985 or newer on Unity 6.5 and later)
Sun and skyA Directional Light you addThe RAPTOR Sky, added automatically

Edit → Project Settings → RAPTOR → Lighting → Light backend shows which one is in use.

  • Before the first Bakery bake, Bakery tests your GPU once per project. Until it has, the Render menu and Bake settings show Bakery needs setup and the bake waits. Set up Bakery runs Bakery's own test and results window. Bake without it skips the test for this GPU, after one question. A PC with another GPU is asked again.
  • On a PC without an NVIDIA GPU, in a project that has Bakery, the Render menu and Bake settings show Bakery needs NVIDIA with Use Unity's lightmapper. This PC then bakes with Unity's lightmapper, and a PC with an NVIDIA GPU keeps baking with Bakery. The choice is kept for this PC only, never in the project's files. Use Bakery in Edit → Project Settings → RAPTOR → Bakery takes it back.