Get RAPTOR

Adding lights

Lights in RAPTOR are baked. Their light, shadows and bounce light are calculated once and stored in lightmaps.

Bakery or Unity

With Bakery installed, RAPTOR places Bakery lights and bakes with Bakery. Otherwise it uses Unity lights and the Unity lightmapper. The steps are the same for both.

Placing a light

Pick a preset, then place the light on a surface.

Open the Lights tool

→ Lights from the toolbar

Pick a preset

Open the Preset menu in the context bar and choose one.

OptionEffect
1000 K to 12000 KPlaces a point light, warm to cool. 2700 K to 3500 K suit indoor rooms
Spot lightPlaces a cone of light
Area lightPlaces a flat panel of light

Click a surface

Move over the ceiling to preview the position, then to place the light. Offset sets its distance from the surface.

A light placed on a model is added to the model's Lights group and moves with it.

a light to edit it in the Inspector. Del deletes the selected lights.

Lighting many faces

The Faces section of the panel places lights evenly across faces. Ctrl faces to add or remove them, then pick a layout:

ButtonAction
Place at centrePlaces one light at the centre of each face
Fill gridPlaces a grid of lights on each face. Set Columns and Rows, then Enter to apply

Checking before a bake

→ Render → Ray-traced preview in the top bar

The 3D view shows the room as the bake will light it. You can still place and move lights while the preview is on.

The preview requires Unity 6000.3 or newer. See Ray-traced preview.

Baking

Bake from the Render menu in the top bar.

Save the scene

File → Save in Unity

A bake needs a saved scene.

Bake lighting

→ Render → Bake lighting

Changed models are built first. The Render menu shows Baking and the progress.

Save again

With Bakery, RAPTOR saves the scene when the bake finishes. Otherwise, save the scene yourself. The lightmaps are stored with the scene.

Render → Bake settings sets the quality: Draft for work in progress, Final for the finished level.

Daylight needs Skybox faces

The sky lights a bake only through faces with the Skybox material from the Special pack applied. A fully closed room gets no sky light.

If a bake does not start, the Render menu shows the reason. See Baking.

Next: Playtesting your room.